Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

How to install Power Windows

Wombles

Cars cost too much.
Joined
Oct 28, 2009
Messages
2,091
Reaction score
30
Points
48
Location
Gippsland
Members Ride
'72 LJ Torana, '95 VS Acclaim and V8 wagon
Mid bcm were in the acclaims. Ignore the low bcm part of his post and he is spot on what you have to do
Actually not all Acclaims have mid.. My Acclaim has a LOW.
 

aussie4life11

Keep It Simple Stupid
Joined
Oct 23, 2011
Messages
1,567
Reaction score
7
Points
38
Location
Western Australia
Members Ride
94 vr 3.8l v6 Auto Acclaim, 2002 Vy Exec Auto
Well the difference between your acclaim and my acclaim is mine is a vr where as yours is a vs. must have reduced the standard bcm to low when they released the vs
 

ephect

Donating Member
Joined
Jul 27, 2006
Messages
5,102
Reaction score
6,464
Points
113
Location
Melbourne
Members Ride
VS Acclaim V6
now im not sure what bcm i have, no biggy, power windows are working :)
 

aussie4life11

Keep It Simple Stupid
Joined
Oct 23, 2011
Messages
1,567
Reaction score
7
Points
38
Location
Western Australia
Members Ride
94 vr 3.8l v6 Auto Acclaim, 2002 Vy Exec Auto
where are the relays located?
 

Wombles

Cars cost too much.
Joined
Oct 28, 2009
Messages
2,091
Reaction score
30
Points
48
Location
Gippsland
Members Ride
'72 LJ Torana, '95 VS Acclaim and V8 wagon
Under the steering column.
 

aussie4life11

Keep It Simple Stupid
Joined
Oct 23, 2011
Messages
1,567
Reaction score
7
Points
38
Location
Western Australia
Members Ride
94 vr 3.8l v6 Auto Acclaim, 2002 Vy Exec Auto
Ohk. Anywhere in particular? Ive identified the 4 above the fuses. Theres only one other one that i cant identify. Its to the right of the steering column. Any pics of the relay/s im looking for?
 

DCEIVDU

New Member
Joined
Nov 24, 2008
Messages
39
Reaction score
0
Points
0
Location
Adelaide, SA
Members Ride
1990 VN SSV Enhanced 5.0, 1999 VT S Pac ll 3.8
Im currenly converting my vn exec into a vp calais and will be doing the power windowa in the next week or two. Thanks to this thread, this should be a cake walk :)
 

Sharon Strudwick

New Member
Joined
Oct 8, 2012
Messages
1
Reaction score
0
Points
0
Age
57
Location
Tamworth NSW 2340
Members Ride
HSV VT Clubsport
Hi just wondered if u could answer a question for me r window regulators the same on a VT. ad a Clubsport vt
 

DCEIVDU

New Member
Joined
Nov 24, 2008
Messages
39
Reaction score
0
Points
0
Location
Adelaide, SA
Members Ride
1990 VN SSV Enhanced 5.0, 1999 VT S Pac ll 3.8
Well instead of making a new post I thought I would add to this one. I recently installed power windows in my VR and I used the VN module so I could get the auto down and timer delay too. Only thing is that it doesn't activate when you unlock the car and when you lock it they stay activated for a little while after it's locked. I had this all wired up outside the car then all I had to do is run all the wiring and once all in the car connect the remaining wires like the Acc; door pin, earth and constant.
Markovr may add to this cos I know he had some other things to add to make them run better, but mine run fairly well so I didn't add them.
Im doing mine tonight. Should be fun. Im doing it all from scratch. Wish me luck
 

NickVR

Active Member
Joined
Jun 11, 2006
Messages
1,414
Reaction score
22
Points
38
Age
38
Location
Adelaide, SA
Members Ride
VR Executive A4 V8
No luck needed really. As long as it is done like the VN/my diagram, you'll be fine.
 
Top