Welcome to Just Commodores, a site specifically designed for all people who share the same passion as yourself.

New Posts Contact us

Just Commodores Forum Community

It takes just a moment to join our fantastic community

Register

How to get thought into the cabin for wires?

velj

New Member
Joined
Jan 11, 2012
Messages
376
Reaction score
0
Points
0
Age
27
Location
victoria
Members Ride
2010 ve sv6 ute
Hi guys I'm goin to install my reversing camera but befor I take my car Apart, how do I get te wires for the camera back inside the cabin to the glove box?
 

Jonno

:)
Joined
Nov 18, 2010
Messages
2,422
Reaction score
7
Points
0
Location
Vic,
Members Ride
;)
first off where do you want to fit the camera?
 

velj

New Member
Joined
Jan 11, 2012
Messages
376
Reaction score
0
Points
0
Age
27
Location
victoria
Members Ride
2010 ve sv6 ute
Number plate but I need to run te wires to the glove box so preferably down the passenger side of the car, btw car is a ute
 

salute the ute

DRIVING IS A PASSION
Joined
Aug 21, 2011
Messages
353
Reaction score
13
Points
18
Location
Rowville
Members Ride
VE Ute Series II Perfect Blue
Behind the drivers side there is a grommet that is used for the hard lid. You have to pull the back section of the tub liner to be able to access this grommet.

Inside the cabin follow my how to on how to install a sailplane to know how to take apart the interior. The back cover just pulls off easily. You should be able to figure most of it out from the inside.

Drivers side in the tray you will have to take off that cover and thread the wires from the back wall behind the liner.

If you have any question please feel free to ask.
 

velj

New Member
Joined
Jan 11, 2012
Messages
376
Reaction score
0
Points
0
Age
27
Location
victoria
Members Ride
2010 ve sv6 ute
Thanks mate, is there any grommets on the left? Near the battery?
 

salute the ute

DRIVING IS A PASSION
Joined
Aug 21, 2011
Messages
353
Reaction score
13
Points
18
Location
Rowville
Members Ride
VE Ute Series II Perfect Blue
Not that I am aware of, but I have die something that needed to follow that same path. Just go behind the rear wall using some straightened whipper snipper line and thread it through.
 
Top