It takes just a moment to join our fantastic community
hi i need some advise on the wiring for a vr t5 going into a vn that was a v6
Hi mate where did you get your knock sensor wiring harness from, I need to get one
Sweet that's what I have, another question, I have a 5 speed manual gearbox out of a vr, going into the vn that was a v6 auto, how dose the wiring...
Hi all I'm putting a 355 into my vn that had a v6 auto in it, I have a manual gearbox out of a vr, I have a vn manual loom and a 5.0L manual ecu,...
Thanks mate now I've pulled it all a part I see what your saying, I'll be keeping everything from the vn and putting it on the vr k frame and I'll...
Would the vr steering rack work in the vn, or should I swap that over as well
Thanks for your help mate I appreciate it
Thanks for that, so I need to change over the control arms etc, I found a v8 booster and a master cylinder that has an inch bore, I was going to...
hi all i need some help/advise, i have a vn with a six in it, im putting in a 355, i have a vr 5.0L kframe and suspention, the top strute plate...
I was thinking of some thing along the lines of a base tune, I also have a haltech interceptor for it as well, it also needs to be wired to the loom
Hi all just finished stroking a 304 to 355 for my vn, what memcal should I use, I'm running a mild cam, big injectors, twin throttle body
Dose anyone know anything about these setups, i have seen 3 of them now and i am looking for some information on them
Ok thanks everyone I appreciate the help, love this forum
There are so many to choose from
Any recommendations on brand
It's going in a vn, and I'm going efi twin throttle body
Hi I'm new here I'm looking for a distributor for a 355 I'm building, any suggestions
Ok thanks, I've got some from engineer place, I have another question, what would be the best distributor for a 355 non carbi setup
Do you know the torque spect
Ok thanks for your help, I appreciate it
Where did you get them from, somewhere like a nuts and bolt shop
Dose anyone know where you can buy the stock rockers from, I've been searching all day, and where to get new bridge bolts as Well
I'm still learning my way around the engine, I think they are hydronic flat tapped
Yeah sorry, it's a vs 304
I was looking for some help with the cam I have, it's a crane, the numbers on one end are
306 (I'm 95% sure)
888 (hard to read)
what are the torque settings for roller rockers
Great, thank heaps for that, much appreciated
The l67 heads I have, have got mace roller rockers, would they suit my vy ecotec
OK no problem, thank you for that
OK thanks, mind if I ask what the differences are
No it's not supercharged, what are the differences if you don't mind me asking
will vt l67 heads suit a vy
Separate names with a comma.