It takes just a moment to join our fantastic community
Its VIN locked, So it needs the VIN reprogrammed. Please note Tech2 can not do this.
Try this guy on facebook he has modules specific for Commodores that bring windows down. It comes in a kit.
Quite a few of the member have it on...
Could be oil leaking onto the exhaust manifold and burning off. Check for oil leaks
Thanks HDK, I am a Auto- Electrician so i like to make wiring neat☺.
This was my second time fibreglassing and am pretty happy with it loads of...
Hey guys how are you, So i had a set of Pioneer TS-C160R sitting in my garage for years wrapped in news paper, they were installed in my VS which...
The 9.8L/100 is becasue of your average speed.
Do you do alot of highway driving or did you reset tje trip computer.
I drive in Sydney and my...
Ahhhh the old VX.
Ok i would suggest you find out what the trouble code is and report back.
What are you fuel trim numbers mate?
I ask because my SV6 MY08 sits around 1.9 - 2.0 per hour everything is OEM engine wise.
You said the engine light was on? What was the trouble code?
If people were to put their trip computer data on this forum people would have real life baseline to go off by.
The real test is to reset the the...
Hey guys how are you, I have not reset my trip computer for 8000km, my average speed is 23.8 to 24km/h and use 13.5l/100kms. I drive in Sydney so...
Another customer installing the GM-200 module check his ride out.
Fuel trim thing? The fuel trims are readings on a scan tool and lets you know what the computer is exactly doing either adding fuel or taking away...
Did you put the o2 on a scope? Thats the only way to find out if they are faulty or not.
People always forget that o2 sensor is just that a...
The Tech-2 shows if the code is current or past ('' OLD '') codes in its description. These past codes are handy when diagnosing problems. :)
Hi mate sounds like your throttle body, before changing it you will need to do some tests like voltage readings at the throttle body.
I own a...
Each bank has "2" o2 sensors pre and post if you swap both pre and post and if the code follows to bank2 how will you know which sensor is at...
Here is a idea for you, switch the o2s around so bank1 o2 will go to bank2 and bank2 o2 goes to bank1 and see if the code comes up bank 2 now, if...
Check for codes then go from there.
Also do you have injector trigger?
You need to test the o2 sensor on a scope to see the cross counts and voltage readings, other wise its all guess work.
The Tech2 has this feature...
Agree with above use OEM unless you are sure of the pin outs, some relays have a diode installed across the coil if this is wired incorrectly this...
Dont go to a Mechanic for Electrical issues, so many customers come into my work after they have gone to the Mechanics for electrical issues only...
Test the crank angle sensor on a oscilloscope this will show if the sensor is faulty or not. Search on google how to do this.
@ Aussie Willy it is :)
Check out this guys Race car using the GM-200.
Very nice Ute.
This is true, but c'mon 35 kms and timing chain needs to be changed this is just ridiculous. Get a second opinion mate, I own a 2007 MY08 Ve Sv6...
The Tech2 has a throttle body relearn option.
Does not take long at all.
Very true, I get 13 to 13.5L/100 50/50 driving.
Yeh mate i have heard that the BMW X3's are quick 3.0 as well, fuel usage is much better than a SS :rofl2:
Yeh the European vehicles have had this feature for a while from factory, the VW are well known for it.
What year model is your BMW mate?
Got the following on my VE, Dunlop 245,45,18 96Y SP Sport Maxx
Very good all rounder and does not break the bank.
This wont cost you nothing, take your spare tyre out.
Does any one know how many KG a spare weighs?
Also Manifold spacers i think they are under $100
This Software version # is for the cluster.
Hi Michael, Yeh the guy does not want his email on a public forum for everyone to see he rather people contact him through Facebook :)
Another install of the GM-200 module :) Check it out
I already answered it :)
Hi guys how are you you will need to program this via the TECH2, This is because its a brand new OEM unit.
Check it out....
Separate names with a comma.