It takes just a moment to join our fantastic community
Great idea mate. I will try and find time to try this soon.
I will report back obviously.
(busy trying to tidy the car up so the wife can drive...
And New Zealand
Big 11" drums on the front with twin leading shoe set up so 2 adjusters per side. Yeah probably a pita but stock style and cheap, which is the...
Realising that you are 8years late (and so then am I)
But last year putting on the COME TTB mani to mine, I understand his confusion of having a...
I had a pretty good week with the truck. I ran a tap through the threads for brake drum screws. Fitted front drums, fitted steering stop tab....
Shouldn't be too hard to find.
Are we talking group3 VK here?
Car sounds VERY rough condition.
Is he going to get it running and swap into something else? Or bring the whole car back from the dead?
Both front bearings set. They might be right, they might not.
Drums were drilled out to 16mm holes for studs, which wasn't enough, so went to...
I think it is already as low as it can go, but will try and take a look this weekend.
Although if tps voltage was out, then wouldn't tps % be out...
Only the ecu datalog on it.
I'll ask immortality to recheck the log. I can't remember what closed value was, but I thought it went 5.0v at w.o.t
Bigger is always better. :)
I'm happy with driver's front wheel bearing at 1-2 though end play.
I now have passenger side assembled the same, but struggling with end play...
Drivers side spindle and brake backplate are now gasketed and lock plated down. Wheel bearings packed and ready to set play.
Swapped backing plates side to side and fitted up wheel cyl's, springs and pads. Also set angle of pads and flipped hub so lock grove is on top....
Great updates. How did I miss out on the fun.
I like the stall advice, as that is next on my list.
Update. I can't count.
The previous post was 7months of updates. Lol.
In other news Happy 50th birthday truck. Have some brakes:
Roller bearing on the conrod?
The cooling system is 12litres, but juice3 is saying when you drop all the water as you explained, there is still water in the block which will...
Just to confirm, this is an LS1?
6months ago tonight I was on the road to pick up this truck.
Basically sat like this:
But 20hours later it was across the island and all...
Number 1 cylinder (drivers side front)
Turn the motor over 360° and return dissy to current position.
Mate rocked up to work in this yesterday:
Mitsi ute and he has done a nice 4G63 conversion. Switching east/west for north/south mounting...
You'll be going flow master as well won't you?
But only after hearing how good it sounds on that drive by video.
Pm me your email and I'll send a short vid from first thing this morning
That sounds very much like what mine is doing
I did read about McCarthy today. But honestly don't follow nfl close enough to know how good he is.
Lol, I'll see what I can do (on my phone)
Onwards and upwards then.
Hang on, what happened to the cowboys?
I had them to win this year (and every year)
Pretty sure we tried TPS position when this problem first arose.
Good idea about blade angle. Although I'm sure it has faulted at 3/4 throttle...
Hooker aero chamber for the win
I am getting 21 and 35
Update, last owner has mounted this steering box in the wrong place, as now left is right and right is left. Solution is to put arm rearward of...
Yeap, but swapping sensors doesn't help. It's either tune related or something funny in the wiring like an overloaded earth, or RFI etc
Swapped alternator belt from an 11a1145 to an 11a1130, this holds the alt in tighter to the block and avoids the alt fan fins chopping my cold air...
Pacemaker headers, twin 2.5" equal length mid section, single hooker aero chamber 3" in and out, under the diff, with 3" and a round muffler out...
Yeah, sounds ignition related to me. (or excessively fuelly)
Yeap, that's all.
It wasn't finished at that point.
Going again in September to see what gains have been made over 3years. Hopefully low 13's. It...
So mail order so you can run it in and drive to a performance shop. Then the performance shop wire in the haltec and dyno tune.
Sounds like a...
Separate names with a comma.